
The Load Controller II is complete
with a 12-volt air compressor, gauge dash panel with inflate and deflate
controls, all electrical connections, air lines, fittings, low pressure
sensor, and a detailed, illustrated installation manual.
Load Controller II systems are economically priced for less
demanding applications, such as the occasional and light duty haulers
and towers. To assist in kit longevity, a Low Pressure Sensor is
included in the Load Controller II kits to assure that minimum unloaded
pressure is maintained at all times, with or without a load.
The Single Gauge systems are recommended for all passenger cars, Suvs, mini vans, and most pickup truck applications when the load is centered and only occasional use is required. The Dual Gauge systems are recommended for all pickups with campers, and full size vans. This would also be a good selection on any vehicle when a left / right leveling correction is desired for light vehicles with part time use or only occasional adjustment is required like weekend camping.
Features and Benefits Single Gauge Load Controller II, P/N 25592 (shown in photo above)
Load
Controller 2 Single Gauge Installation Instructions
Features and Benefits Dual Gauge Load Controller II, P/N 25812:
Load
Controller 2 Dual Gauge Installation Instructions
Order Load
Controller II Kits Online
![]()
The Load Controller I kit
is complete with a 12-volt compressor, gauge dash panel with inflate and
deflate controls, all electrical connections, air lines, fittings, and a
detailed, illustrated installation manual. Load
Controller I systems are designed for heavy and/or frequent users, which
includes all motorhome rear applications. Load Controller I
system offers twice the flow of our Load
Controller II light duty air compressor system, meaning that the bags fill
in half the time!
The Dual Gauge systems are recommended for all motorhome rear kits, heavy pickup campers and contractor vehicles where bias loads and frequent use is common. The Single Gauge systems are recommended for all heavy duty and frequent use applications and centered loads. Common applications for the single gauge systems are: towing heavy horse trailers, towing race car trailers, and contractor vehicles.
Features and Benefits Single Gauge Load Controller I, P/N 25655:
Load
Controller 1 Single Gauge Installation Instructions
Features and Benefits Dual Gauge Load Controller I, P/N 25651 (shown in photo above):
Load Controller
1 Dual Gauge Installation Instructions
Order Load Controller I Kits Online
![]()
Purchase the SmartAir system and receive a FREE limited lifetime warranty on your Air Lift air spring kit. It doesn't get any easier- the SmartAir system automatically adjusts to changes in load and road conditions- just set it and forget it.

The height sensor / ECU is mounted to the vehicle frame and the magnet is mounted to the axle or leaf spring. When load is added to the vehicle, the magnet rises above the ECU centerline (as the suspension is compressed). If the magnet maintains this position for a minimum of 25 seconds, the ECU will turn on the compressor via the relay adding air to the air bags. Air is added until the magnet is re-centered, restoring the vehicle to its preset ride height. When load is removed from the vehicle, the magnet falls below the ECU and energizes the solenoid valve. This allows the air to escape from the air bags until the magnet is re-centered and the reduction in load is met. An optional kneeling system can be purchased which includes a dash mounted rocker switch. This system works to manually exhaust air from the bags when a lower vehicle is needed while parked.
Part# 25415 Single Sensor System (shown in photo above) $279.00 Part# 25430 Dual Sensor System $486.00 |
![]() |
![]() |
![]() QuickShot Air Compressor System With Air Tank |
![]() Auto Pilot Digital Air Suspension Management System with compressor and tank |
Air Lift replacement parts |
![]() Application Guide by make, model and year |
![]()
|
Auto Accessory Gift Ideas | Maintenance Tips | Fax Order Form | Aftermarket Line Sheet |
|
Order Toll Free: 1-888-425-2885 Sales Dept. / Accessory Tech. Help: Fax: 1-216-441-9127 Phone Support Hours EST: |
Automotive Accessories Connection Inc.
E - mail: sales@accessconnect.com |
Your car, truck, van and suv accessories dealer on the web since 1996
Anything on our web site is quoted in US government
dollars.
Currency converter
Quantity discounts available. Please contact our
sales staff at: 1-216-441-9120
|
Copyright: 1996, 1997, 1998, 1999, 2000 |